The 43oh 1202 LCD BoosterPack is a new BoosterPack created to support the Nokia 1202 LCD, which are perect for small display projects. It has been revised and feature loaded by Spirilis. The 43oh Store also carries the Nokia 1202 LCD.

Features:

  • Houses Nokia 1202 LCD with surface mount 0.6mm-pitch pads elongated for flexible soldering
  • Nokia 1202 pinout header (0.1" pitch) available for use in breadboards and other applications
  • Two 6x6mm pushbuttons (pass-through or SMD) allow some interaction with your firmware
  • Bottom-side of board allows reconfiguration of most connections and features
  • SPI pins broken out into solder jumpers and a 1x3 SMD header to select USCI vs USI pinout
  • LCD RESET line defaults to LaunchPad's RESET but can be diverted to an I/O pin with optional pullup / pulldown resistor
  • LED backlight supported via NPN transistor circuit or optional 1x2 SMD jumper.  Series resistor supported for limiting backlight's current
  • Pushbuttons have an optional hardware-debounce circuit available through pads on the bottom side of the board
  • SMD pads next to LaunchPad headers allow quick rewiring of pin functions by cutting the solder-jumper and running a jumper wire

Write a review

Please login or register to review

The Nokia 1202 LCD BoosterPack

  • Product Code: DEV-MSP-NOKIA-1202-BOOST-PCB
  • Availability: Out Of Stock
  • $5.00


Related Products

Nokia 1202 96x68 1.3" Monochrome LCD

Nokia 1202 96x68 1.3" Monochrome LCD

The Nokia 1202 LCD is a nice versatile display currenlty being actively used among hobbyists  including communities like 43oh and Dangerous ..

$3.99